!: How to Build a Waterfall For Your orchad Pond

Building a waterfall is easier than you think and will add a new dimension to your pool.

When building a waterfall, as with any orchad project, you must first think the compose and make a plan. The biggest mistake that population make when planning a pond waterfall is to err on the large side. For a pond measuring 12 ft x 14 ft you should think in terms of a fall of 18-24 inches. The width of the waterfall should be in proportion to the size of your pond. The important point is to make sure that the scale of your building fits in with the surrounding features and does not spoil the equilibrium of your full, orchad design.

The next interrogate that has to be answered is the type of building you wish to use. There are two basic choices. You can either use a liner and place rocks to form the fall or you can save yourself the issue and buy a fibreglass unit. either way you will still have to use your shovel to form the site of the waterfall.

The other requirement is a pump which will be sited in the pool to converyance the water to the top of your waterfall. The size of pump that you will need depends on the height and width of the waterfall and also the length of pipe from the pump to the top of the fall. Once you have finalised your plans, consult your
dealer and he will be able to provide you with the correct pump.

To enounce a salutary pond environment with crystal clear water usually involves installing a biological filter. Again your dealer will be able to recommend you as to the correct type and size. The filter should be located at the top of the waterfall so that the water is cleaned before issuing out on to the fall.

Once you have assembled all the tool it is time to get out your shovel. If your site is level and the soil from excavation of your pond is colse to this can be used as the mound on which to place the waterfall. If you are using a liner you first dig out the channel and then fit the liner. Next place the rocks so that the water can flow over them. It is helpful if you seek a natural waterfall to give you some ideas as to how the rocks can be located for the greatest effect. Once you are satisfied with the arrangement, use black waterfall foam to seal the rocks to ensure that the water flows over and colse to them and not underneath. If you have chosen to use a fibreglass preformed model, you will avoid the problem of placing the rocks and will just have to dig out sufficient soil to allow you to fit the unit.

To complete the factory fit the pump, filter and hose and join together to the electricity supply. Providing all is working to your satisfaction, now is the time to relax and enjoy your handiwork.

If you have read this far and are wondering either it would be just too much like hard work, then think this. Water soothes and relaxes, inspires reflection, and is a source of beauty. A cascading, bubbling stream adds interest and serenity to the garden, while a waterfall can generate a dramatic centerpiece. building a pond waterfall well is worth the effort.